‹ Back

Nox Rust 3100 – Rust Preventive Liquid

Nox-Rust 3100 liquid is a solvent/wax-type heavy duty corrosion preventive liquid. It is designed for use on ferrous and non-ferrous metals when exposed to indoor or outdoor storage conditions.

Used as a transit coating, it protects metal and most painted surfaces during domestic and international shipment. Excellent humidity and salt spray protection properties. Best choice for protecting equipment and machinery during export and outdoor environments.

Features

Proven Daubert Cromwell corrosion inhibitor chemistry

  • Protects ferrous and non-ferrous metals
  • Can be handled after 3-6 hours, sets up in 12-24 hours.
  • Low VOC (3.29 lb/gal).
  • Dried film is non-tacky, amber colored, wax-like and semi-transparent
  • OEM Approved
  • Compatible with Daubert Cromwell corrosion inhibitor papers, films and emitters
  • Manufactured to meet MIL-C-16173 Class 1 Grade 4.
  • Available in aerosol cans, 5-gal drums, 55-gal. drums and totes.

Typical Applications

Transport, export, storage of metal products

  • Hose fittings, connectors, and similar exposed areas
  • Equipment, machinery, and components during overseas shipments
  • Large metal parts stored outdoors
  • Long-term indoor storage of metal parts, dies, tools, spares
  • Castings and machined surfaces that cannot be protected from the elements
  • Fabricated metal components and sub-assemblies

Surface Preparation and Application:

  • The metal surface should be clean, dry and free of rust, oil and mil scale. Metal temperature should be between 50-95oF (10-35oC) at the time of application. Apply by dip, brush or spray. When dipped, the wet applied film thickness ranges from 3.0 to 4.0 and will dry in 1 hour to a film thickness of 1.5 to 2.0 mils.
  • When using an airless spray system, recommended equipment is a 15:1 or 23:1 type pump, a regulator, 25-or 50-ft. hose, and a P-500 type spray gun with a reversible tip. Tip size could range .315-.317. Spray pressure is typically between 65-80 psi. Recommended starting point is 70 psi, and then adjust as operator determines is best for the application.
  • The curing process takes place by solvent evaporation. Allow adequate ventilation. Dry time will be affected by temperature and humidity. Typical dry-to-handle time would be 1-2 hours, and cure in 24 hours. The coating will have self-healing properties for up to 90 days

Removal

Nox-Rust 3100 liquid can be removed from metal surfaces by most solvent borne thinners , by vapor degreasing , high pressure hot alkaline wash , low pressure steam or using mineral spirits or kerosene –soaked towels.

PRODUCT CODEUOMSizeUS. Size
NOXRUST3200-20LPAIL20L5 GAL

CONTACT US TODAY FOR A QUOTE AND CONSULTATION

At Australian Inhibitor, our custom VCI packaging and corrosion protection solutions prioritise protection and functionality. Get in contact with us to organise a consultation to assess which of our anti corrosion packaging solutions is the most appropriate for you. Collaborate with our expert team to ensure that your products are protected during shipping and storage. Whether you’re looking for anti rust packaging, protective customised packaging solutions, or need advice on the best corrosion protection packaging for your business, we’re here to help. Don’t hesitate, to book a consultation, or get a quote today!